Precautions for debugging door and window machine

Many aluminum door and window manufacturing companies have not actually operated the equipment before purchasing, so here we introduce some details of installation and debugging of door and window machine.

Firstly, in terms of electricity. The voltage of 380V is the normal voltage for general door and window mechanical equipment. The voltage must be stable, and the circuit should not affect the use of the equipment and personnel operation as much as possible. The ground circuit should be protected with a cover.

Secondly, in terms of gas supply. Due to the need to ensure sufficient air supply for the pressing of door and window equipment, better use can be achieved. This is the foundation to achieve cylinder compression. Under normal circumstances, the gas supply and air pressure of door and window equipment have fixed parameter requirements, that is, the gas supply flow rate should reach 0.3 and the air pressure should be able to reach 8 pressures. In the case of multiple door and window equipment, it is necessary to prepare more air storage tanks, which depends on the actual situation. If the air pressure cannot be reached, the accuracy of the door and window processing equipment will be affected accordingly, and the processing effect will also deviate from expectations.

Thirdly, in terms of equipment. There are many types of broken bridge aluminum door and window equipment, and each type of equipment will have multiple models or different parts, etc. So in terms of installation and debugging of door and window equipment, it is necessary to coordinate the work of various areas and grasp every detail.

Fourthly, in terms of space, in the equipment usage area, it is necessary to arrange the placement of equipment reasonably, achieving a one-stop process from the storage and sawing of raw materials to the production of finished doors and windows. There should be no problem of having to go to the west to transport materials when cutting materials from the east.

Fifth, in terms of security. It is necessary to ensure that the equipment is dedicated to a dedicated person, and to post the safety usage regulations and methods for handling safety accidents of the equipment.

Sixth, equipment maintenance. Equipment maintenance should be carried out by dedicated personnel, and power and gas must be cut off before maintenance. After use every day, clean the equipment and debris, and check for any abnormalities in the equipment.